汽車尾氣分析儀相關技術參數如下：詳情可聯系
 

NO/NO2/NOX

Heated Chemiluminescence Nitrogen Oxides Analyzer

加熱型化學發光氮氧化物分析儀

TOPAZE 32M

Exists in 2 different versions, to meet your analytical requirements:

存在兩個不同版本，來滿足您的分析需求。

TOPAZE 32M-S：

NO或NOX監測

TOPAZE 32M-D:

NO-NOX和NO2

同時監測

Remote control using ConTACTTM software

CONTACTTM軟件用于遠程控制

SPECIFIC FEATURES:

專有特征：

Utilizes the CLD technique for continuous and simultaneous measurement of NO、NO2 and NOx, in compliance with EN14792

使用CLD技術對NO、NO2和NOX進行連續和同步測量，符合EN14792標準。

Proven EPA reference method

被驗證過的EPA參考方法

Accurate measurement in the range:0-10/100/1000/10 000ppm

在量程(0-10/100/1000/10 000ppm)范圍內實現準確測量。

Heated analyzer(temperature controlled up to 180℃),measuring chamber under vacuum resulting minimized quenching effect

加熱型分析儀（溫度控制在180℃）和真空測量腔使淬滅效應最小化。

Graphic Liquid Crystal Display(LCD)

形象的液晶顯示面板（LCD）

Interactive menu driven software with enhanced speed display

支持增強速度顯示的交互式菜單驅動軟件

Real time calibration graph

實時校準圖

Built-in memory for data storage

內置存儲器用于數據存儲。

Built-in Ethernet TCP/IP connection for remote control and serial interface RS232

內置以太網TCP/IP連接用于遠程控制和RS232通訊

Fast response time( 2s)

快速的響應時間（ 2s）

Communication by AK protocol(RS232/RJ45)

通過AK協議(RS232/RJ45)進行通訊

APPLICATIONS:

應用：

Engine manufacturing and testing in the automotive, heavy duty, aviation, marine, rail transport sectors, etc.

汽車行業、重型機械、航空、船舶和鐵路運輸部門等發動機制造和測試

Continuous Emission Monitoring

在線連續監測

Combustion control

燃燒控制

Process monitoring

過程監測

Laboratories and Research Centres...

實驗室和研究機構等

Heated Chemiluminescence N

加熱式化學發光氮氧化物（NOx）分析儀

TECHNICAL SPECIFICATIONS:

技術參數：

Ranges:0-10/100/1000/10000ppm

量程：0-10/100/1000/10 000ppm

Noise(2 sigma): 1%F.S.

噪聲（2 ）： 1%F.S.

Lower detection limit:0.1ppm on the lowest range

低檢測限：0.1ppm（在最低量程）

Response time: 2sec(T10-90)

響應時間： 2s(T10-90)

Zero drift: 1%/24h

零點漂移： 1%/24h

Span drift: 1%/24h

量程漂移： 1%/24h

Linearity: 15 for a concentration between 15% and 100% of the full scale s range

線性度： 1% 測量氣體濃度（氣體濃度在15%-100%F.S內）

Sample flow rate:0.7 to 1L/min at 20psi

取樣流量：0.7-1L/min（壓力為20psi時）

Capillary block temperature: heated up to 180℃

校準模塊溫度：加熱至180℃

Housing:Standard19 -3U rack

機殼：標準19 -3U機箱

Dimension：483x440x135mm(LxWxH)

  19x17.3x5.3 inches(LxWxH)

尺寸：483x440x135mm（LxWxH）

  19x17.3x5.3 inches(LxWxH)

Weight:10Kg/22lbs

重量：10Kg/22磅

Operating temperature:5-45℃

工作溫度：5-45℃

Communication：RS232＆TCP/IP,AK protocol

通訊：RS232＆TCP/IP,AK協議

Ethernet network connection

以太網連接

UTILITIES:

工具：

Power supply:

-230V,50Hz-115V,60Hz

-Consumption 350VA

電源供電：

-230V，50Hz-115V、60Hz

-功耗 350VA

O2 100% for the ozone generator(engine gas applications) or synthetic/purified for other applications

O2 100%用于臭氧發生器（發動機氣體應用場合）或人工/凈化空氣用于其它應用場合

OPTIONS AND ACCESSORIES:

可選項及附件：

Memory extension

存儲器拓展

Internal heated-pump(for standalone use)

內部加熱泵（單獨使用）

Heated line with SS 2um built-in filter

加熱線（含SS 2um內置濾芯）

ESTEL electronic board（1 or 2）with:

-4 independent analog input

-4 independent analog outputs

-4 remote control inputs

-6 dry contacts outputs

ESTEL電路板（1或2）含有：

4個獨立的模擬輸入

4個獨立的模擬輸出

4個遠程控制輸入

6個固態繼電器輸出

SOREL electronic board with:

-4 dry contacts outputs

-4 dry contacts inputs

SOREL電路板含有：

4個固態繼電器輸出

4個固態繼電器輸入

Special version without LCD screen for use in engine gas cabinet:

特殊版本（無LCD顯示屏）用于發動機氣體機柜

PRINCIPLE OF OPERATION:

工作原理：

TOPAZE 32M analyzer uses the proven Chemiluminescence technique for the measurement of NO/NOx.

TOPAZE 32M分析儀使用已經被驗證過的化學發光技術實現對NO/NOx的監測。

In the NO mode, the technique relies on the chemiluminescent reaction between ozone(O3) and nitric oxide(NO) yielding nitrogen dioxide(NO2) and oxygen. This reaction produces light whose intensity is proportional to quantity of NO being sampled.

在NO模式，檢測技術依賴于通過NO和O3的化學發光反應生成NO2和O2，本反應產生的光，其強度正比于NO的取樣濃度。

For total NOx, the sample is first passed through the internal NO2 to NO converter which converts the NO2 in the sample to NO. The resulting reaction is directly proportional to the total concentration of NOx.

對于NOx總量，樣品首先通過內部的氮氧轉化爐，將樣品中的NO2轉化為NO。經轉化爐轉化后的化學反應的光強度正比于NOx總濃度。

DEscriptION:

描述：

TOPAZE 32M analyzer is equipped with a heated inlet capillary block and measurement chamber, which maintains the sample above its dew point to prevent condensation inside the analyzer. The analyzer is microprocessor controlled, with complete gas data, internal diagnostics, alarms, and calibration settings available to the operator via the keypad or remotely using ConTACTTM Software via TCP/IP or RS232. Ranges can be automatically or user selectable via the keypad. Automatic calibration may be programmed for preset intervals or initiated remotely.

TOPAZE32分析儀配備一個加熱的入口毛細管模塊和測量腔來保持取樣樣品高于其露點溫度，避免在分析儀內部冷凝。分析儀由微處理器控制，用戶可以通過TCP/IP或RS232由鍵盤或CONTACTTM遠程控制軟件獲取所有氣體測量數據、內部診斷、報警和校準設置信息。量程為自動的或由用戶通過鍵盤選擇。自動校準可以通過編程選擇預設頻率或遠程啟動。

TOPAZE 32M-S:Equipped with a single reaction chamber, TOPAZE 32M-S allows the monitoring of NO or NOx(manual or remote-controlled selection).

TOPAZE 32M-S:

配備一個單反應腔，TOPAZE 32M-S用于NO或NOx監測（手動控制或遠程控制可選）

TOPAZE 32M-D: Uses dual reaction chamber and 2 PM tubes: the TOPAZE 32M-D: is conceived for the simultaneous monitoring of NO-NOx and NO2

TOPAZE 32M-D:使用雙反應腔和兩個PM管，TOPAZE 32M-D設計用于NO-NOx和NO2同時監測。

關注本網官方微信 隨時閱讀專業資訊