手機版|
二維碼|
ERWEKA Offline System
Overview
The ERWEKA offline dissolution systems are controlled by an DT 820 series dissolution tester. ERWEKA DT 820 series offers advanced intelligence and features for stand-alone operation or for control of complete dissolution offline sampling system. It allows storage of up to 60 product test-run parameters.
The DT 820 series comes with integrated intelligence for controlling the offline sampling system, which consists of aautosampling stationconnected to the DT, an8-channel peristaltic pump IPC 8and thesample collector FRL 824for storing the samples into glass tubes or sealed HPLC vials.
This configuration does not require an additional PC or any software and therefore saves space, money and last but not least software validation work.
DT820
ERWEKA DT 820 series offers advanced intelligence and features for stand-alone operation or for control of complete dissolution offline sampling system. It allows storage of up to 60 product test-run parameters.
The DT 820 series can be equipped with 6, 7 or 8 test stations and be used in standard High-Head or Low-Head mode. It offers an OQ traffic light to show USP/EP compliance as well as an external temperature sensor for checking the water bath.
The water bath is designed for easy access and cleaning and is made of non-leaking PET.
Shaft with
Each DT 820 is fitted with the UniShaft system for stainless steel- or fluoropolymer coated stirring elements for methods 1, 2 and 5. One single stirring shaft is screwed to either paddle (PEEK), basket holder or rotating cylinder. Due to the special design height adjustment is not required.
The shafts in combination with two different stirring shaft lengths allows to operate DT 820 in either conventional High-Head- or low-evaporation Low-Head mode.
Overview
The ERWEKA DT 820 offers various features that play in hand with other ERWEKA products. It is suitable as high-end Dissolution Tester but also offers connectivity for a whole setup of dissolution systems, complete with automated sample collection and UV-measurement.
It s flexibility is unmachted and is perfectly accompanied by the Disso.NET software, your PC software solution for our dissolution prodcuts.
SpecificationsTechnical details:
Heating range: 30-50° C (+/- 0.2° C), cooling optional
Pre-heat function
Wobble less than 0.2 mm at delivery (paddles)
Corrosion-free plate for holding the vessels
Programme menu for storage of the monographs of up to 60 products
Automatic self-check of the temperature in the bath/vessels before test start
Alpha-numeric touch sensitive keypad with illuminated full-graphic 5.7” Dot-matrix display
USB printer interface for documentation of the test run parameters (time, date, rpm, temperatures etc.) by a standard printer
OQ Traffic Light for display of the USP/ EP compliance of the unit
Hours of operation counter
Automatic height adjustment
Automatic vessel centering
Standard tablet drop magazine for 8 samples
Evaporation less than 1% during 24h (37.0°C, 50rpm, 1000ml).
pH change routines, menu guided optic and acoustic reminder for manual sampling (count-down)
Manual lifter with gas strut support
One-piece moulded PET water bath with outlet valve
PT 100 external temperature sensor for water bath- or media temperature display included
Options:
Easy to clean one-piece moulded water bath outlet valve
DT 820 series options
Upgrade to work as a Offline dissoluton system
Video monitoring/recording
Paddles, baskets, discs for paddle-over-disk, rotating cylinder, enhancer cell, intrinsic dissolution, felodipine baskets, suppository baskets, extraction cell
Dissolution qualification tool kit
IQ/OQ/PV documents
IQ/OQ/PV service
Maintenance service
Automated tablet drop magazine with control of temperature tolerance (USP) before drop
USP compliant sampling station with automatic height adjustment of the USP sampling points
Illumination (white LEDs) for water bath for better visibility of the samples
External cooling device with autonomous operation
ASS-8
The ERWEKA auto sampling station ASS-8 with automatic height adjustment takes into account the applied method and the used media volume. Similar to manual sampling the tubes are inserted into the media only for sampling time needed and withdrawn after sampling is finished. Since this system adheres to USP requirements, crossvalidation is not required.
Sample collectionPeristaltic Pump IPC-8
With the standard ERWEKA 8-channel peristaltic pump IPC 8 the sample is withdrawn from the test vessel and transferred to the sample collector FRL x24.
The pump tubings are made of Verderprene (similar to Fluoropolymer) to prevent the absorption of active ingredients.
Alternatively a high pressure piston pump PVP 620 or 820 (6 or 8 channels only) allows filtration from 0.22 μm.
With a high precision syringe pump type SP automated dilution of the sample in ratio up to 1:10 is possible.
Sample collection with the FRLDosing is performed by overfilling and leveling or 3-way solenoid valves incorporated into the sample collector FRL 624 / 724 or 824 with 6, 7 or 8 channels. There are several sampling possibilities of max. 26 sampling intervals into glass tubes or glass tubes and sealed/unsealed HPLC vials as well as media replacement.
Easy access to sample tubes
Easy to clean
Up to 26 rows for extended release formulation testing
Integrated cleaning procedure
Needles available in stainless steel or titanium for sensitive APIs, HPLC vials and glass tubes
Special procedure for foaming medias handling
Automated flush routine between sampling intervals
Gentle and precise spindle drive of the sample collector FRL
Movable trays provide easy exchange of different racks
Different racks available for glass tubes or HPLC vials
26 x 8 glass tubes 12 ml
18 x 8 glass tubes 25 ml
26 x 8 HPLC vials 1.5 ml
26 x 8HPLC vials 4.0 ml
In combination with the 14 vesselDT 161xdissolution tester the automated sampling and media replacement can be performed in 14 vessels simultaneously. In this case a peristaltic pump IPC-16 is included in the system.
Ultra Filtration (below 1.0 μm) - AFC 825For HPLC analysis (but also to fulfil the regulations of the Japanese and Russian Pharmacopeia) filtration below 1.0 μm has to be performed.
Since filters below 1.0 μm porosity usually are blocked after use they have to be exchanged after each sampling interval.
ERWEKA has developed theAFC 825 filter changer, which automatically replaces used membrane with new ones.
The AFC 825 can be used in Offline Systems (controlled via the DT 820 Dissolution Tester) as well as in UV-VIS On- and UV-VIS Off-/online Systems (controlled via the ERWEKA Dissolution Software).
Filtration down to 0.22 μm is possible in combination with the high-pressure PVP 820 Piston Pump (1.0 μm in combination with Syringe- and Peristaltic Pumps).
Filters can be exchanged either after each test run or after each sample withdrawal interval.
Technical details:
Dissolution Tester/sERWEKA DT 820PumpsIPC 8 peristaltic pump8-channel peristaltic pump,RS 232 serial interface for external control,touch sensitive keys and LC display,Verderprene tubing for elimination of absorption of active ingredientsFraction Collector FRL 824Sample collector FRL for sampling up to 24 sampling intervals; movable tray for easy exchange of racks; 1 driven dosing arm with 8 stainless steel dosing tubes, RS 232 interface for external control by the dissolution tester DT 82x series.Sampling Containers
26x 8 glass tubes of 12 ml capacity;
16x 8 glass tubes of 25 ml capacity;
26x 8 HPLC vials of 1.2 ml or 4.0 ml capacity
Membrane Piercing
The FRL 824 offers HPLC vial membrane piercing to fill into sealed HPLC vials
Media Replenishment
The FRL 824 offers to replenish the withdrawn (stored) media volume by fresh media from a integrated container.
Dilution
As option the FRL 824 automates dilution of the stored sample up to 1:10 with an accuracy of ± 0.1 ml (10 ml syringes), only in combination wiht syringe pump SP 640 or 840 (6 or 8 channels)
Tubing
fluoropolymer tubing
Cleaning
The FRL 824 offers an automated cleaning routine between each sampling interval
System Control
DT 820 Series with i-Version upgrade for control of a complete offline system including sample transfer pump and sample collector FRL.
