機器視覺 機器視覺就是用機器代替人眼來做測量和判斷。一個典型的機器視覺應用系統包括圖像捕捉、光源系統、圖像數字化模塊、數字圖像處理模塊、智能判斷決策模塊和機械控制執行模塊。在一些不適于人工作業的危險工作環境或者人工視覺難以滿足要求的場合，常用機器視覺來替代人工視覺。在大批量重復性工業生產過程中，用機器視覺檢測方法可以大大提高生產的效率和自動化程度。 精品推薦
品牌： 加拿大WDI 型號： ATF6-PZ Sensor 產地：加拿大 供應商：上海西努光學科技有限公司

The ATF6PZ SWIFTWDI’s ATF6PZ SWIFT is a high speed, high accuracy, autonomous digital autofocus sensor. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fast digital image processing. By projecting a laser line onto the sample and digitally processing the image, the ATF6PZ SWIFT provides fast and precise output to accurately control the focus position of external piezo Z actuators and stages. By supplying an analog output, the sensor can connect and direct a piezo Z device without the need to go through a secondary controller.High Accuracy At Fast SpeedsWDI’s ATF6PZ SWIFT sensors project their focusing laser directly through the objective lens of the microscope. This “Through The Lens” (TTL) technique allows the sensor to provide extremely accurate autofocus, with a success rate typically higher than 99%. The ATF6PZ SWIFT’s onboard digital processing coupled with an improved faster sampling rate allows it to maintain this accuracy with 3 times the speed of previous versions. As the sensor connects directly to the piezo Z device autofocus times are shortened.Static or Dynamic AutofocusThe ATF6PZ SWIFT is continually assessing distance and direction to focus, updating its data every 0.15 milliseconds. This allows the sensor to keep samples in focus regardless of whether they are stationary or in motion. This powerful tracking autofocus makes it perfect for scanning very large specimens precisely at very high speeds.Maximum FlexibilityBy projecting a laser line, the AFT6PZ SWIFT sensor operates equally effectively on patterned and un-patterned specimens as well as diffusing and reflective surfaces making it ideal for media such as TFT arrays and photo masks. The sensor also automatically adjusts its laser intensity and sensor expose time, allowing it to adapt from low reflectivity (down to 1%) to highly reflective (99%) surfaces. It is compatible with objectives from 2X to 100X, and wavelengths including UV, NUV and NIR.Easy IntegrationAll of the sensors in WDI’s ATF family are designed with ease of integration in mind. They are compatible with most types of infinity corrected microscope objectives. The AFT6PZ SWIFT comes as a stand-alone sensor with analog output for direct connection to an external piezo a Z actuator or stage amplifier. All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve.ATF6PZ SWIFT AUTO FOCUS TRACKING SYSTEMATF6-PZ SensorStructured Light PatternLine SegmentSensor WavelengthChoice of 660nm or 785nmImage DetectorLine Scan CMOSInternal Update Rate20kHzStatic Autofocus Accuracy± 1/4 Objective Depth of FocusFast Tracking Autofocus Accuracy± 1/2 Objective Depth of Focus General PerformanceOutput Data Rate6.5kHzReflectivity Adaption Delay1msLaser TypeSemiconductorLaser SafetyClass 2 660, 785nmWeight250gDimensions40 X 40 X 120mmMaximum Cable Length1.8mComplianceCE SEMIExternal RequirementsSpecimen ReflectivitySpecimen ReflectivityGlass Thickness 0.5mmDiffusing SpecimenYesSpecular SpecimenYesSpecular SpecimenYesTextured SpecimenYesOperating SpecificationsInput Voltage18V to 25V, 24V NominalOperating Temperature18°C ~ 35°CStorage Temperature10°C ~ 45°CHumidity10% ~ 90% Non Condensing

品牌： 加拿大WDI 型號： ATF6 SWIFT Sensor 產地：加拿大 供應商：上海西努光學科技有限公司

?The ATF6 SWIFTWDI’s ATF6 SWIFT is a high speed, high accuracy, autonomous digital autofocus sensor. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fast digital image processing. By projecting a laser line onto the sample and digitally processing the image, the ATF6 provides extremely fast and accurate measurements of the distance and direction to focus. This information can then be output directly to WDI’s MCM+ or MCZ controller, or to any compatible controller.High Accuracy At Fast SpeedsWDI’s ATF6 SWIFT sensors project their focusing laser directly through the objective lens of the microscope. This “Through The Lens” (TTL) technique allows the ATF6 SWIFT to provide extremely accurate autofocus, with a success rate typically higher than 99%. The on-board digital processing coupled with an improved faster sampling rate allows it to maintain this accuracy with 3 times the speed of previous versions.Static or Dynamic AutofocusThe ATF6 SWIFT is continually assessing distance and direction to focus, updating its data every 0.15 milliseconds. This allows the sensor to keep samples in focus regardless of whether they are stationary or in high speed motion.Maximum FlexibilityBy projecting a laser line, the AFT6 SWIFT sensor operates equally effectively on patterned and un-patterned specimens as well as diffusing and reflective surfaces making it ideal for media such as TFT arrays, photo masks and semiconductor wafers. The sensor also automatically adjusts its laser intensity and sensor expose time, allowing it to adapt from low reflectivity (down to 1%) to highly reflective (99%) surfaces. It is compatible with objectives from 2X to 100X, andwavelengths including UV, NUV and NIR. The ATF6 SWIFT can also achieve focusing with a programmable Z offset function.Easy IntegrationAll of the sensors in WDI’s ATF family are designed with ease of integration in mind. The ATF6 SWIFT can be purchased as either a stand-alone (SA) sensor with analog output, or as a full autofocus system (SYS), integrated with either WDI’s MCM+ controller for driving an external Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation. All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve. The AFT6 SWIFT is also available in specially designed configurations; one for LCD inspection/repair, another designed for the unique requirements of OLED, LTPS IG70 panel inspection and other suited for cell and module repair.ATF6 SWIFT AUTO FOCUS TRACKING SYSTEMATF6 SWIFT SensorStructured Light PatternLine SegmentSensor WavelengthChoice of 510nm, 660nm or 785nmImage DetectorArea Scan CMOSInternal Update Rate20kHzStatic Autofocus Accuracy± 1/4 Objective Depth of FieldFast Tracking Autofocus Accuracy± 1/2 Objective Depth of Field General PerformanceOutput Data Rate6.5kHz6.5kHz6.5kHzReflectivity Adaption Delay1msLaser TypeSemiconductorLaser SafetyClass 2 510, 660, 785nmWeight250gDimensions40 X 40 X 120mmMaximum Cable Length1.8mComplianceCE SEMIExternal RequirementsSpecimen Reflectivity1% ~ 99%Glass Thickness 0.5mmDiffusing SpecimenYesSpecular SpecimenYesSpecular SpecimenYesTextured SpecimenYesOperating SpecificationsInput Voltage18V ~ 25V, 24V NominalOperating Temperature18°C ~ 35°CStorage Temperature10°C ~ 44°CStorage Temperature10% ~ 75% Non Condensing

品牌： 加拿大WDI 型號： ATF5 Sensor 產地：加拿大 供應商：上海西努光學科技有限公司

?The ATF5WDI’s ATF5 is a high speed, high accuracy, autonomous digital autofocus sensor. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fast digital image processing. By projecting multiple laser dots onto the sample and digitally processing the image, the ATF5 provides fast and accurate measurements of the distance and direction to focus. This information can then be output directly to WDI’s MCM+ or MCZ controller, or to any compatible controller.High Accuracy At Fast SpeedsWDI’s ATF5 sensors project their focusing laser directly through the objective lens of the microscope. This “Through The Lens” (TTL) technique allows the ATF5 to provide extremely accurate autofocus, with a success rate typically higher than 99%. The ATF5’s on-board digital processing allows it to couple this accuracy with extremely high speeds.Static or Dynamic AutofocusThe ATF5 is continually assessing distance and direction to focus, updating its data every 0.6 milliseconds. This allows the sensor to keep samples in focus regardless of whether they are stationary or in motion. This powerful tracking autofocus makes the ATF5 perfect for scanning very large specimens quickly and precisely.Maximum FlexibilityBy projecting multiple reference spots, the AFT5 sensor operates equally effectively on patterned and un-patterned specimens. This makes it ideal for media such as TFT arrays and photo masks. The ATF5 also automatically adjusts its laser intensity and sensor exposure time, allowing it to adapt from low reflectivity (down to 1%) to highly reflective (99%) surfaces. It is compatible with objectives from 2X to 100X, and wavelengths including UV, NUV and NIR. The ATF5 can also achieve focusing with a programmable offset function, allowing inspection of both the top and bottom surfaces of a transparent medium.Easy IntegrationAll of the sensors in WDI’s ATF family are designed with ease of integration in mind. They are compatible with most types of infinity corrected microscope objectives. The ATF5 can be purchased as a full autofocus system, integrated with either WDI’s MCM+ controller for driving an external Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation. All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve.ATF5 AUTO FOCUS TRACKING SENSORATF5 SensorStructured Light PatternSeven DotsSensor WavelengthChoice of 660nm or 785nmImage DetectorLine Scan CMOSAutofocus Update Rate20kHzStatic Autofocus Accuracy± 1/4 Objective Depth of FocusFast Tracking Autofocus Accuracy± 1/2 Objective Depth of Focus General PerformanceOutput Data Rate1.7kHz in tracking modeReflectivity Adaption Delay2msaser TypeSemiconductorLaser SafetyClass 2Weight250gDimensions40 X 40 X 120mmMaximum Cable Length1.8mComplianceCE SEMIExternal RequirementsSpecimen Reflectivity1% ~ 99%Glass Thickness 0.5mmDiffusing SpecimenYesSpecular SpecimenYesPatterned SpecimenYesTextured SpecimenYesOperating SpecificationsInput Voltage18V ~ 25V, 24V NominalOperating Temperature18°C ~ 35°CStorage Temperature10°C ~ 45°CHumidity10% ~ 75% Non Condensing

品牌： 加拿大WDI 型號： MMS LFOV 產地：加拿大 供應商：上海西努光學科技有限公司

Increased Throughput EfficiencyThe use of sensitive large-format line scan sensors and new large field of view high resolution objectives enable semiconductor, FPD and electronics manufacturers to speed up the inspection process . These increases lead to greater manufacturing efficiencies and production throughput.Field of View OpticsThe MMS LFOV incorporates specialized components of WDI’s Modular Microscope System (MMS) engineered to support LFOV objectives and cameras. The system uses a motorized Z-Axis Actuator, MMS body and 1X Tube Lens which have been engineered to ensure the highest optical quality is maintained over the entire sensor.Automated Focus and IlluminationThe MMS LFOV is able to incorporate any one of WDIs Autofocus Sensors and illumination options to create a completely autonomous inspection system which can be controlled with a single control unit. The flexibility in autofocus and perfectly homogeneous illumination allows the MMS LFOV to be used in a wide variety of manufacturing applications including semiconductor, FPD, OLED, packaging and photovoltaic and solar panel inspection.Practical DesignTo handle the high demands of manufacturing facilities, the MMS LFOV features rugged industrial components, a small footprint and low weight, even when fully automated. Its modular nature allows it to be completely upgradable,ensuring the best performance for all current and future applications.LARGE FIELD OF VIEW MODULAR MICROSCOPEQIOPTIC 2XMagnification2XNumerical Aperture0.08Working Distance24.8mmField of View12.5mmQIOPTIC 5XMagnification5XNumerical Aperture0.2Working Distance13.0mmField of View5mmQIOPTIC 8XMagnification8XNumerical Aperture0.32Working Distance7.0mm (estimated)Field of View3.125mmMotorized Z ActuatorType1/32 Stepper MotorTravel8mm (±4mm)Maximum Resolution0.156μm/stepMaximum Speed10mm/secMaximum Acceleration100 mm/s2AutofocusATF-4, ATF-5 ATF-6, ATF-7IlluminationILL-WLED22, ILL-RLED22, ILL-GLED22, ILL-BLED22, ILL-4LED ILL-XESTR, ILL-XELED, ILL-HPLEDCameras/Sensor SupportMaximum Detector Diagonal25mm (1X Tube lens)Electrical Requirements18V to 25V DC24V NominalOperating Temperature10°C ~ 30°CAmbientOperating Humidity 70%Non Condensing

品牌： 加拿大WDI 型號： LFOV DIC 產地：加拿大 供應商：上海西努光學科技有限公司

Differential Interference ContrastThe use of Differential Interference Contrast (DIC) with large format line scan sensors and high resolution optics enable semiconductor, FPD, electronics and other industries to quickly image subtle surface structures and details which are not normally visible. The ability to image and subsequently analyze these structures leads to greater manufacturingefficiencies and production throughput.Automated Focus and IlluminationThe LFOV DIC microscope is able to incorporate any one of WDIs Autofocus Sensors and High Power LED illumination options to create a completely autonomous inspection system. The flexibility in autofocus and illumination allows the LFOV DIC to be used in a wide variety of manufacturing applications including semiconductor, FPD, OLED, packaging and photovoltaic and solar panel inspection.Practical DesignTo meet the requirements of in line manufacturing, the LFOV DIC microscope features rugged industrial components, a smallfootprint and low weight. Its modular nature allows it to be completely upgradable, ensuring the best performance for all current and future applications. LARGE FIELD OF VIEW DIC MODULAR MICROSCOPEObjectives (Single Lens System)*Magnification5X10x20XNumerical Aperture0.150.30.45Working Distance20mm11mm3.1mmField of View26.526.526.5DIC OpticsPolarizerIntegrated Fixed Polarizing Beam SplitterApodizing FilterIntegrated Fixed Apodizing FilterAnalyzerAdjustable Dichroic AnalyzerDIC PrismAdjustable DIC PrismMotorized Z ActuatorType1/32 Stepper MotorTravel10mm (±5mm)Maximum Resolution0.156μm/stepMaximum Speed10mm/secMaximum Acceleration100 mm/s2AutofocusIntegrated WDI Autofocus SensorModel and Wavelength options availableIlluminationIntegrated WDI High Powered LEDColour and Intensity options availableCameras/Sensor Support**TypeArea Scan or Line Scan TDI SensorMaximum Image Size28mm DiagonalMountC-Mount or F-Mount (other options available)Electrical Requirements10°C ~ 30°C24V NominalOperating Temperature10°C ~ 30°CAmbientOperating Humidity 70%Non Condensing

品牌： 加拿大WDI 型號： MMS microscope automation 產地：加拿大 供應商：上海西努光學科技有限公司

To meet the demanding requirements for applications such as Laser Micromachining, Stealth Scribing and In Line Optical Inspection, WDI has collaborated with its customers to develop automated modular microscopy systems (MMS). These systems include varying requirements such as large field of view optics, efficient multi wavelength laser delivery and illumination, real time tracking autofocus, fast lens changers and accurate Z-axis actuators. As the MMS is completely modular it is adaptable to any application and environment. It can be configured with any of WDI’s microscopy automation components including its Auto Focus Sensors (ATF), Linear Lens Changes (LLC), Z- Axis Actuators (ZAA) as well as a variety of illuminators, tube lenses and controllers. The MMS is compatible with objectives provided by most major microscopy companies, including Near Infrared and large diameter high resolution lenses. It can be equipped with a laser port for the introduction of machining lasers, and is designed to allow the addition of digital imaging cameras, CCD arrays and zoom lenses. WDI has also created a Differential Interference Microscope Kit, to further expand the power of the MMS by adding a DIC capability.A clear focus on microscopy automationBy utilizing advanced optics, innovative mechanical design and quality materials the MMS meets the demands of many industries for a configurable, small footprint, light weight microscope. It does this while remaining rugged and reliable enough to withstand the harshest manufacturing and in line inspection environments.Benefits of the MMSHigh quality image acquisition attributable to both advanced optics and optical components engineered for digital imagingIncreased efficiency and minimum downtime resulting from rugged materials and mechanical design with a focus on exceeding the demands of manufacturing environmentsCompromise free performance due to modular components which permit customization and configuration tailored to specific applications and requirementsLongevity and an excellent ROI thanks to the modularity of the system which allows upgrading and addition of features and functions as needs evolveMinimal footprint and space requirements with no sacrifice to automation owing to the compact and light weight materials, simple design and integration of componentsAt the heart of the MMS is the Main Body unit. Like many MMS components each unit is constructed using light weight aluminium creating a compact design and small footprint which remains riged and rugged enough to handle the harshest environments. A meticulous manufacturing process and strict quality control ensure an accurate precise optical path perfect for digital imaging. As all MMS Main Bodies come with an integration kit they are easily paired with a WDI ATF module. The careful machining also ensures that all other WDI MMS components are easily integrated. The Main Body features a variety of mounting options for gantry and other frames making incorporation of a complete MMS into any manufacturing environment easy.In order to accommodate the wide variety of digital imaging cameras and devices available today, the MMS features a number of different Tube Lens options. Like the Main Body, each Tube Lens has been precisely manufactured and quality control inspected to ensure both an accurate optical path and perfect image projection. All Tube Lens options available on the MMS have been designed for digital imaging. Recognizing the need to integrate newer line scan and large format CCD/CMOS cameras the MMS also features a Tube Lens option specifically designed with a larger field of view. To further ensure ease of integration the Tube Lens’ also have the ability to accommodate both industry standard C-Mount and F-Mount imaging devices.Understanding that customer requirements vary the MMS Lens Changer family features a variety of Linear Lens Changers (LLC) and rotary lens turrets to suit every application. All units are precision engineered and manufactured to maintain a high level of accuracy, repeatability and reliability. WDI designed the LLC line with speed in mind using shaft linear motors which can change between nearby lenses in 0.2 seconds and across five lenses in less than 0.4 seconds. New to the LLC family is the LLC+, a modular version of the LLC which accepts different objective insert plates allowing unprecedented flexibility in how a system may be configured. Advanced features of the LLC include the ability to utilize high resolution, large diameter objectives and provide illumination via objective ring lights. The onboard encoders built into each LLC give them a positioning accuracy of 0.1 micrometers, ensuring reliable, accurate and repeatable performance, every time. Finally, the LLC line is Class 10 cleanroom certified and designed with a small footprint and light weight materials permitting integration into the most demanding manufacturing environments.The MMS takes advantage of WDI’s complete line of high speed, high accuracy, autonomous digital autofocus sensors. Using Smart Sensor Architecture (SSA) and Through The Lens (TTL) technology, each unit incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor. This allows the ATF to provide extremely accurate autofocus, with a success rate typically higher than 99%. The on-board processing allows each ATF to couple this accuracy with extremely high speeds, typically achieving focus in less than 0.6 seconds. As the ATF is continually assessing distance and direction to focus, it can be used both in static imaging applications and as a dynamic tracking device. The ATF line features a number of options allowing them to operate effectively on various target samples including patterned and un-patterned specimens as well as diffusing and reflective surfaces. Each ATF is designed with ease of integration in mind. The ATF can be purchased as either a stand-alone sensor, or as a fully integrated autofocus system complete with one of WDI’s controllers. All ATFs feature small, standardized footprints and connections allowing in field upgrades. The ATF is able to integrate with WDIs Optical Offset Adjuster (OOA) to create an offset between the sensor and imaging focal plane. Together with the ZAA, these components allow unprecedented flexibility in the types of applications the MMS can be tailored to. The AFT line also features several specially designed configurations including one for LCD inspection/repair, one designed for the unique requirements of OLED, LTPS IG70 panel inspection and versions compatible with piezo Z actuators.WDI has designed a number of different Z-Axis Actuators (ZAA) for the MMS to meet the varying demands of manufacturing and research environments. A ZAA model exists to suit every application. All ZAA units are built to maintain a high level of accuracy, repeatability and reliability. Like the LLC line the ZAA family of actuators has been engineered with speed in mind. By using fast stepper motor drives and 1/32 micro stepping, the ZAA can achieve a maximum speed of 10mm/s. The ZAA remains very accurate with 0.15mm per step resolution. As it integrates with the ATF sensor, creating a positive feedback system, the MMS is always in focus. As with all MMS components the ZAA integrates easily into a complete microscopy system with the use of a WDI controller.WDI’s MMS is compatible with a wide variety of objective lenses available from manufacturers such as Mitutoyo, Olympus, Zeiss and Nikon. It is thus able to meet the needs of a wide variety of applications. All lenses have been chosen to ensure the best combination of working distance and optical performance. The MMS features Infinity Corrected Plan objectives which ensure a flat, well focused image, over the entire field of view. All lenses are apochromatically corrected which is the highest level of chromatic colour correction available today. The combination of planar and apochromatic correction make all MMS objective lenses ideal for digital imaging. The MMS is also able to utilize specialty objectives such as those designed for Higher Resolution imaging or those designed for Near-Infrared light transmittance.Understanding that illumination is key to successful microscopy digital imaging and that application requirements vary greatly, WDI has designed a variety of illumination options. All illuminators feature a compact and light weight design to ensure ease of integration and have precise intensity which can be computer controlled. The MMS illuminators are very flexible in their design and may be configured for field coaxial through the lens, back light or slit illumination. Furthermore, most illuminators mount directly to the MMS system which ensures both a smaller overall footprint and the elimination of fiber optic or liquid light guide bundles. All LED illuminators have very low power dissipation and consumption and, due to their LED technology, provide constant light temperature regardless of intensity. The MMS illuminator family also features unique options such as a Four LED version, a Xenon Strobe and a combination Xenon LED model.The MMS includes a variety of controller options ensuring the complete automation of functions, such as Z-Axis actuation, autofocus, objective lens selection and illumination. All controllers are compact and light weight, maintaining a very small footprint to ensure ease of integration within manufacturing and in line inspection environments. Each controller is capable of providing all essential functionality for a wide variety of applications. All WDI controllers are autosensing; once they are physically connected they are able to detect and begin to function with ATF sensors and other MMS components. All controllers include the ability to drive a ATF module and either a single or dual LED illuminator. The MMS controller family comes with WDI’s PC compatible control software and communication is made simple via standard RS232 connections.To support the Modular Microscopy System WDI has built a Microscopy Application Support Team (MAST) who collectively possess a wealth of microscopy application and engineering knowledge. This group of over 10 full time scientists and professional engineers from a number of disciplines, including mechanical, electrical, optical and software, is dedicated to supporting MMS customers. The MAST team allows customers to discuss their requirements and needs with skilled specialists who understand both their application and the unique challenges they face. Together the team is then able to overcome technical, automation and integration issues and deliver a complete MMS solution. The MAST group also has the ability to design and manufacture unique customized microscopy automation solutions when standard configurations and components are unable to meet a customer’s requirements.modelDescriptionCamera PortsNotesMMS-STDModular Microscope Body Standard2Includes ATF integrating kitMMS-LPTModular Microscope Body Laser2Includes laser port and ATF integration kitMMS-2CAModular Microscope Body 2 Camera2Includes 2nd camera port，tube lens and ATF integrateing kitmodelDescriptionOpticsMountFOVTBL-1XTube Lens Standard 1X 1XC-Mount22mmTBL-0.75XTube Lens Standard 0.75X 0.750.75F-Mount24mmTBL-LFVTube Lens Standard 1X Large Field of View1XF-Mount28mmTBL-OLYOlympus 1X C-Mount1XC-Mount22mm

品牌： 加拿大WDI 型號： MIC AOI 產地：加拿大 供應商：上海西努光學科技有限公司

The MIC AOIThe MIC AOI line of automated optical inspection and laser micro machining microscopes meets the demands of modern manufacturing in the LCD, LED, OLED and semiconductor industries. Each MIC AOI is designed and built to exceed a customer’s application requirements in terms of image quality, system stability, reliability and speed. WDI’s MIC AOI is a proven system and is currently used by many major manufacturers within the flat panel display, semiconductor and electronics industry for both defect review and inspection as well as laser repair, trimming and dicing.Designed for IndustryRegardless of the specific configuration all MIC AOI microscopes include features suited for in line manufacturing. All systems are made from sturdy materials ensuring mechanical stability yet feature a compact lightweight design for optimal performance. Designed for both static and high speed scanning applications each system can be made fully autonomous in terms of focus, illumination and lens selection. All MIC AOIs offer exceptional image quality and optical design and can support image sensors up to 1” in size. Finally, all MIC AOIs are Class 10 cleanroom compliant and meet SEMI standards.Tailored to the ApplicationEach MIC AOI is configured with internal optics and components to meet specific application requirements. A choice of WDI Autofocus Sensor (ATF) ensures the system maintains focus whether it is in motion or static, regardless of surface type. A variety of integrated LED illumination options including standard LED, 4 colour LED, High Power LED or Xenon LED Hybrid ensure that image quality is maintained.The high precision integrated “Z Power Stage” (ZPS) ensures automatic, accurate focusing of the microscope regardless of the payload. Each MIC AOI can be customized with a 4, 6 or 8 positio encoded Linear Lens Changer (LLC) which ensures fast and accurate objective lens switching. For laser repair, trimming and dicing applications the MIC AOI can also be configured with a laser port and internal optics to allow 2, 3 or 4 laser wavelengths.Easily IntegratedAll components of the MIC AOI are easily combined and use minimal cabling. Furthermore, a single Multifunction Controller MFC is able to control and operate each component, making operation and integration of the final system simple.

品牌： 重慶徠深 型號： Dragon Vision230 產地：重慶 供應商：重慶徠深科技有限公司

Dragon Vision根據應用需求可分為五種型號： 一、經濟型：有無判斷、殘缺判斷、形態判斷、缺陷分析I、尺寸測量。 二、專用型：定位工具、對位工具、機器人引導、幾何測量。 三、標準型：缺陷分析、缺陷檢測II、彩色識別、幾何測量、智能學習、定位工具、對位工具、差異工具、識別檢測（OCR/OCV、1D/2D讀碼）。 四、高端型：彩色定位、色差分析、彩色識別、外觀檢測、缺陷分析、幾何測量、智能學習、定位工具、對位工具、機器人引導、3D測量、3D缺陷檢測。 五、旗艦型：3D機器人定位、線掃檢測、色度亮度測量/補償、深度學習、標準型全工具系列。 簡單易用：DragonVision是一套不用編程的可配置的視覺系統，使用簡單，無技術背景也可上手操作。強大的算法：包含了上百種算法，如輪廓匹配算法、3D算法、深度學習算法等，仍然還在持續增加中。多任務協作運行：DragonVision架構開放，支持多線程、多任務并行處理、有效提升運行效率。工具使用：工具即拖即用，工具可自由配置，工具間結果相互引用。工具包含檢測、定位、測量、讀碼與識別。支持多種通訊：支持串口、TCP服務端/客戶端、Modbus串口/TCP/RTU、FST、三菱MX、通訊歐姆龍F(tuán)ins等。支持統計及分析：為用戶提供了強大的統計數據功能，還可對數據進行合格率分析。支持相機：根據檢測內容選擇合適的相機，可支持面陣相機、線掃相機、3D相機，可同時接入10個相機。支持機器人引導：支持Adept、ABB、Epson、UR、Yamaha、大研、華數、啟帆、三菱等國內外品牌機器人。部分功能介紹： 【深度學習檢測】：龍睿旗艦型新增深度學習檢測功能，與傳統算法融為一體，可以兼顧到需要測量、定位和檢測的綜合應用需求。是傳統視覺軟件朝AI應用的延伸，可以解決以前無法很好解決的大量檢測難題?！疽曈X定位】：含有豐富的定位工具，如圖像采集、校準工具、旋轉中心、幾何定位、抓取、糾偏計算等。擁有強大的多重模板分析能力，可以區分高度相似的物體，還有功能強大的去模糊算法，即使被測對象大小變化、位置變化、角度變化、亮度波動、對象重疊等情況下，也可以穩定搜索定位，對被測物體的位置偏移進行補正?！緳C(jī)器人引導】：支持視覺定位、傳送帶跟蹤和機器人引導等。可與各品牌機器人通訊，只需選擇設定對應參數，即可輕松實現機械手與DragonVision直接通訊。如您有自己的機器人品牌，我們可以免費開發接口及通訊程序，以支持您的品牌。機器人2D視覺引導/機器人3D視覺引導。 【缺陷檢測】：DragonVision含有豐富的視覺缺陷檢測工具，如直線卡尺、圓周卡尺、斑塊分析、顏色識別、檢查直邊、輪廓缺陷等，適用于產品或工件的有無檢測、正反檢測、缺陷檢測、外觀檢測等。 【3D檢測】：可通過3D數據檢測最小/最大高度、凸/凹面積、凸/凹體積等。還可通過自由曲面信息抽取高度的變化點，進行零件的缺陷、凹痕檢測。 【識別檢測】：支持多種類型的條碼和二維碼檢測、設置簡單，識別穩定。 具有可獨立配置的多碼識別功能。相機一次拍照可讀取多達50個碼，一個視野范圍內可根據不同位置碼的圖像質量單獨配置參數，龍?？勺x取28種碼制且自帶訓練功能。還可結合檢測、定位和測量應用，大大提高了現代化生產的效率?！静噬珗D像分析】：高端型增加了彩色圖像分析功能，可以彩色定位、彩色測量、顏色識別、色差分析、統計特征等。 功能示例： 平臺對位：可用于XYQ、UVW等平臺。 機械手定位引導：可用于裝配、分揀、傳送帶位置跟蹤等。 在線/離線檢測：可用于激光加工、玻璃、鋰電池、電子元器件、五金件等缺陷檢測。 線掃檢測：可用于大尺寸、高精度的缺陷檢測，如PCB板、玻璃面板、背光模組、涂布等。 識別：可用于醫藥、食品、產品包裝、印刷等一維碼、二維碼識別，OCR/OCV的檢測。 3D測量：可用于高度段差、平面度的測量、3D引導定位等。 2D測量：可用于2D長寬尺寸、圓半徑、弧度、周長等。 顏色識別：可用于識別有不同顏色的物體，從而實現各種檢測及控制。 色差分析：可用于顏色、大小不同的產品，可以檢測產品顏色個數、色差、色序等。 3D機器人定位：可用于引導六軸機器人抓取三維空間中的物體，如無序分揀等。 3D檢測：可用于3D成像3D偽彩圖處理。 

品牌： 重慶徠深 型號： VDSR 產地：重慶 供應商：重慶徠深科技有限公司

視覺傳感器是整個機器視覺系統信息的直接來源，主要由一個或者兩個圖形傳感器組成，有時還要配以光投射器及其他輔助設備。視覺傳感器的主要功能是獲取足夠的機器視覺系統要處理的最原始圖像。 VDSR Check傳感器 VDSR Locat傳感器 VDSR ID 傳感器 成本低，體積小，易使用，精準，高效

品牌： 重慶徠深 型號： VD230 產地：重慶 供應商：重慶徠深科技有限公司

【參數說明】 特點： ● 單目3D視覺引導 ● 雙目3D視覺引導 ● TOF 3D視覺引導 ●激光線掃3D視覺引導 【產品介紹】 VD230是通過處理工件的3D點云數據，對工件進行定位，同時確定其位置信息，引導機器人進行工作。實現了工業機器人自動化產線的真正柔性工裝。 核心算法： 機械手與相機的手眼標定；多姿態，自動標定；基于透視成像原理的模板匹配算法以及空間點云匹配算法。 可應用場景 ● 料框堆疊物體的立體識別定位； ● 工件的散亂、無序來料定位抓取； ● 曲面容器里工件上下料定位； ● 多品種工件的機器人3D抓取上料定位； ● 復雜多面工件的柔性化3D抓取定位； ● 等等。

品牌： 重慶徠深 型號： VPAD 產地：重慶 供應商：重慶徠深科技有限公司

?VPAD視覺平板為視覺龍公司自主研發的專利產品，是一種新概念“嵌入式智能視覺系統開發平臺”。該平臺提供硬件處理器以及輔助應用開發的軟件開發包，支持中英文操作界面。相同的硬件，不同的應用軟件形成不同的應用產品，VPAD可充當人機界面HMI、機器人示教器、上位主機等多種功能角色。 VPAD采用Cortex-A9雙核處理器，Linux操作系統，穩定可靠。

品牌： 加拿大WDI 型號： WDI IRLC 產地：加拿大 供應商：上海西努光學科技有限公司

激光共聚焦顯微鏡多層檢測近紅外激光和掃描共聚焦組合而成的IRLC有著諸多優勢。首先便是具備了對薄晶片的多層高分辨率圖像的采集能力；同時，IRLC具備更深的樣品穿透能力、更高的分辨率和更快的圖像采集速度；近紅外優化光路系統包含了全套Olympus近紅外長工作距離物鏡。這組物鏡專為硅晶圓的內部結構檢測而設計，采用優化的近紅外光學系統，并配備專用的校正環以適應不同后面的硅片或玻璃表面。一鍵雙視野IRLC包含一組可見光彩色成像系統和一組近紅外共聚焦系統。這種搭配可對樣品表面和底層（最深達800μm）同時成像。由于采用了ATF6/0AA/ZAA技術（即實時快速自動聚焦技術），IRLC實現了真正意義上的實時聚焦-不管觀察方式和樣品表面狀況如何變化，視野內持續聚焦?fàn)顟B(tài)。簡潔的軟件界面功能完善、操作簡單，直觀的軟件界面設計旨在提高工作效率，簡化檢測流程?；静倏毓δ馨▽φ彰?、放大倍率、XYZ控制以及對焦補償?shù)膮?shù)調整。 載物臺移動可通過軟件操控、手柄操控、或者簡單地點擊實時畫面來完成。高級功能線性XY “pointto point” 和 “pointto multipoint” 測量及高級圖像采集選項可實現均幀、AveragedImage、Z軸序列采集、以及在兩點間圖像序列采集。自動檢測集成了全電動控制和自動聚焦的IRLC，配合全自動軟件可實現全自動檢測流程，并可在同一流程內對多個樣品進行檢測。CIS（CMOS成像芯片）很多CIS模塊已經在像素上方加裝了保護面板和彩色濾光片，給檢測帶來很多困難。使用IRLC即可輕松看到表面之下的結構特征。5X BF (Front)5X IRLC (Front)20X IRLC (Front)50X IRLC (Front)100X IRLC (Front)高摻雜半導體從正面穿透金屬基板觀察是不可能實現的；使用IRLC從背面穿透300μm高摻雜硅可清晰觀察到該區域下的內部結構. 10xBF (Front)20XIRLC (Back)50XIRLC (Back)100XIRLC (Back)低摻雜半導體使用IRLC從背面穿透800μm低摻雜硅，刻蝕圖案清晰可見. 5X BF (Front)20XIRLC (Back)50X IRLC (Back)100X RLC (Back)MEMS器件 僅使用明場觀察，表面細節清晰可見；使用IRLC，表面之下的MEMs結構清晰可見。 5X BF (Front)5X IRLC (Front)10XIRLC (Front)20XIRLC (Front)

品牌： 深圳旗眾智能 型號： QZDJ1000 產地：深圳 供應商：深圳市旗眾智能科技有限公司

QZDJ1000是旗眾智能耗時多年開發的全功能視覺點膠，滴塑，噴涂，五金上色通用控制器平臺，該控制器是CAD繪圖+機器視覺+運動控制+數據庫管理在點膠行業里的**結合，示教更直觀，簡單，運行速度更快，更平穩，借助視覺定位，匹配，糾正，實現普通系統無法比擬的優勢。

品牌： 加拿大WDI 型號： ATF7 Sensor 產地：加拿大 供應商：上海西努光學科技有限公司

The ATF7WDI’s ATF7 is a high speed, high accuracy, autonomous digital autofocus sensor. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fast digital image processing. By projecting a laser line onto the sample and digitally processing the image, the ATF7 provides fast andaccurate measurements of the distance and direction to focus. This information can then be output directly to WDI’s MCM+ or MCZ controller, or to any compatible controller.High Accuracy At Fast Speeds.WDI’s ATF7 sensors project their focusing laser directly through the objective lens of the microscope. This “Through The Lens” (TTL) technique allows the ATF7 to provide extremely accurate autofocus, with a success rate typically higher than 99%. The ATF7’s on-board digital processing allows it to couple this accuracy with extremely high speeds.Static or Dynamic AutofocusThe ATF6 is continually assessing distance and direction to focus, updating its data every 0.6 milliseconds. This allows the sensor to keep samples in focus regardless of whether they are stationary or in motion. This powerful tracking autofocus makes the ATF7 perfect for scanning very large specimens quickly and precisely.Maximum FlexibilityBy projecting a laser line, the AFT7 sensor operates equally effectively on patterned and unpatterned specimens as well as diffusing and reflective surfaces making it ideal for media such as TFT arrays and photo masks. The ATF7 also automatically adjusts its laser intensity and sensor expose time, allowing it to adapt from low reflectivity (down to 1%) to highly reflective(99%) surfaces. It is compatible with objectives from 2X to 100X, and wavelengths including UV, NUV and NIR. The ATF7 can also achieve focusing with a programmable Z offset function.Easy IntegrationAll of the sensors in WDI’s ATF family are designed with ease of integration in mind. The ATF7 can be purchased as astand-alone sensor with analog output, or as full autofocus systems, integrated with either WDI’s MCM+ controller fordriving an external Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation.All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digitalformats, making them both easy to install and easy to upgrade as application requirements evolve. The ATF7 is pin topin compatible with the ATF4SA and is thus a “plug and play” upgrade.ATF7 AUTO FOCUS TRACKING SYSTEMATF7 SensorStructured Light PatternLine SegmentSensor WavelengthChoice of 660nm or 785nmImage DetectorLine Scan CMOSInternal Update Rate20kHzStatic Autofocus Accuracy± 1/4 Objective Depth of FocusFast Tracking Autofocus Accuracy± 1/2 Objective Depth of Focus General PerformanceOutput Data Rate1.7kHzReflectivity Adaption Delay1msLaser TypeSemiconductorLaser SafetyClass 2 660 nmWeight250gDimensions40 X 40 X 120mmMaximum Cable Length1.8mComplianceCE SEMIExternal RequirementsSpecimen Reflectivity1% ~ 99%Glass Thickness 0.5mmDiffusing SpecimenYesSpecular SpecimenYesPatterned SpecimenYesTextured SpecimenYesOperating SpecificationsOperating Specifications18V ~ 25V, 24V NominalOperating Temperature18°C ~ 35°CStorage Temperature10°C ~ 45°CHumidity10% ~ 75% non condensing

品牌： 加拿大WDI 型號： ATF4-PZ Sensor 產地：加拿大 供應商：上海西努光學科技有限公司

The ATF2-LVWDI’s ATF2-LV is a high speed, high accuracy, autonomous digital autofocus sensor system. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fastdigital image processing. By projecting a laser dot onto the sample and digitally processing the image, the ATF2-LV brings the microscope quickly to close vicinity of final focus. The sensor then refines focus using image contrast analysis.100% Focusing SuccessThe ATF2-LV has all the advantages of a digital laser autofocus system such as high speed, a large capture range and fast operation regardless of the objective being used. These advantages are combined with the benefits of video signal derived focusing such as reliability, immunity to “bad spots” and low cost to produce an effective system with 100% focusing success rate with no comprise to either speed or range regardless of the specimen or target.Maximum FlexibilityThe ATF2-LV sensor is designed to automatically adjust its laser intensity as well as the image sensor’s exposure time, allowing it to adapt to a wide variety of specimens, from low reflectivity (down to 1%) to highly reflective (up to 99%). It is compatible with objective lenses from 2X to 100X magnification, and wavelengths from UV to NIR. As the ATF2-LV utilizes fast laser based course autofocus then switches to video image based fine focus it is designed for static applications without the need for dynamic tracking.Easy IntegrationAll of the sensors in WDI’s ATF family are designed with ease of integration in mind. They are compatible with most types of infinity corrected microscope objectives. The ATF2-LV can be integrated with either WDI’s MCM+ controller for driving anexternal Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation. All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve.ATF2-LV STATIC AUTO FOCUS SENSOR SYSTTEM ATF2 –LV SensorStructured Light PatternSingle DotSensor Wavelength660nmImage DetectorArea Scan CMOSStatic Autofocus Accuracy± 1/4 Objective Depth of Focus General PerformanceReflectivity Adaption Delay1msLaser TypeSemiconductorLaser SafetyClass 2Weight250gDimensions40 X 40 X 120mmMaximum Cable Length1.8mComplianceCE SEMIExternal RequirementsSpecimen Reflectivity1% ~ 99%Glass Thickness 0.5mmBack Surface Reflectivity0% ~ 99%Diffusing SpecimenYesSpecular SpecimenYesPatterned SpecimenYesTextured SpecimenYesOperating SpecificationsInput Voltage18V ~ 25V, 24V NominalOperating Temperature18°C ~ 35°CStorage Temperature10°C ~ 45°CHumidity10% ~ 75% Non Condensing

品牌： 加拿大WDI 型號： ATF4 Sensor 產地：加拿大 供應商：上海西努光學科技有限公司

The ATF4WDI’s ATF4 is a high speed, high accuracy, autonomous digital autofocus sensor. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fast digital image processing. By projecting a laser dot onto the sample and digitally processing the image, the ATF4 provides fast and accurate measurements of the distance and direction to focus. This information can then be output directly to WDI’s MCM+ or MCZ controller, or to any compatible controller.High Accuracy At Fast SpeedsWDI’s ATF4 sensors project their focusing laser directly through the objective lens of the microscope. This “Through The Lens” (TTL) technique allows the ATF4 to provide extremely accurate autofocus, with a success rate typically higher than 99%. The ATF4’s on-board digital processing allows it to couple this accuracy with extremely high speeds, typically achieving focus in less than 0.6 seconds.Tracking AutofocusThe ATF4 continually assesses both the distance and direction to focus, updating its data every 0.5 milliseconds. This allows the sensor to keep samples in focus regardless of whether they are stationary or in motion. This powerful tracking autofocus makes the ATF4 perfect for scanning very large specimens quickly and precisely.Maximum FlexibilityThe ATF4 sensor is designed to automatically adjust its laser intensity as well as the image sensor’s exposure time, allowing it to adapt to a wide variety of specimens, from low reflectivity (down to 1%) to highly reflective (up to 99%). It operates very well on plane reflective surfaces such as glass and unpatterned Si wafer. It is compatible with objective lenses from 2X to 100X magnification, and wavelengths including UV, NUV and NIR. The ATF4 includes Laser Enable and Camera Sync features for automatically suspending the laser.Easy IntegrationAll of the sensors in WDI’s ATF family are designed with ease of integration in mind. They are compatible with most typesof infinity corrected microscope objectives. The ATF4 can be purchased as either a stand-alone sensor with analog output, or as full autofocus system, integrated with either WDI’s MCM+ controller for driving an external Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation. All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve.ATF4 AUTO FOCUS SCANNING SENSORATF4 SensorStructured Light PatternSingle DotSensor WavelengthChoice of 660nm, 785nm or 850nmImage DetectorLine Scan CMOSAutofocus Update Rate1.2kHzStatic Autofocus Accuracy± 1/4 Objective Depth of FocusFast Tracking Autofocus Accuracy± 1/2 Objective Depth of Focus General PerformanceReflectivity Adaption Delay1msLaser TypeSemiconductorLaser SafetyClass 2Weight250gDimensions40 X 40 X 120mmMaximum Cable Length1.8mComplianceCE SEMIExternal RequirementsSpecimen Reflectivity1% ~ 99%Glass Thickness 0.5mmDiffusing SpecimenNoSpecular SpecimenYesPatterned SpecimenNoTextured SpecimenNoOperating SpecificationsInput Voltage18V ~ 25V, 24V NominalOperating Temperature18°C ~ 35°CStorage Temperature10°C ~ 45°CHumidity10% ~ 75% Non Condensing

品牌： 加拿大WDI 型號： ATF2 –LV Sensor 產地：加拿大 供應商：上海西努光學科技有限公司

The ATF2-LVWDI’s ATF2-LV is a high speed, high accuracy, autonomous digital autofocus sensor system. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fastdigital image processing. By projecting a laser dot onto the sample and digitally processing the image, the ATF2-LV brings the microscope quickly to close vicinity of final focus. The sensor then refines focus using image contrast analysis.100% Focusing SuccessThe ATF2-LV has all the advantages of a digital laser autofocus system such as high speed, a large capture range and fast operation regardless of the objective being used. These advantages are combined with the benefits of video signal derived focusing such as reliability, immunity to “bad spots” and low cost to produce an effective system with 100% focusing success rate with no comprise to either speed or range regardless of the specimen or target.Maximum FlexibilityThe ATF2-LV sensor is designed to automatically adjust its laser intensity as well as the image sensor’s exposure time, allowing it to adapt to a wide variety of specimens, from low reflectivity (down to 1%) to highly reflective (up to 99%). It is compatible with objective lenses from 2X to 100X magnification, and wavelengths from UV to NIR. As the ATF2-LV utilizes fast laser based course autofocus then switches to video image based fine focus it is designed for static applications without the need for dynamic tracking.Easy IntegrationAll of the sensors in WDI’s ATF family are designed with ease of integration in mind. They are compatible with most types of infinity corrected microscope objectives. The ATF2-LV can be integrated with either WDI’s MCM+ controller for driving anexternal Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation. All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve.ATF2-LV STATIC AUTO FOCUS SENSOR SYSTTEMATF2 –LV SensorStructured Light PatternSingle DotSensor Wavelength660nmImage DetectorArea Scan CMOSStatic Autofocus Accuracy± 1/4 Objective Depth of Focus General PerformanceReflectivity Adaption Delay1msLaser TypeSemiconductorLaser SafetyClass 2Weight250gDimensions40 X 40 X 120mmMaximum Cable Length1.8mComplianceCE SEMIExternal RequirementsSpecimen Reflectivity1% ~ 99%Glass Thickness 0.5mmBack Surface Reflectivity0% ~ 99%Diffusing SpecimenYesSpecular SpecimenYesPatterned SpecimenYesTextured SpecimenYesOperating SpecificationsInput Voltage18V ~ 25V, 24V NominalOperating Temperature18°C ~ 35°CStorage Temperature10°C ~ 45°CHumidity10% ~ 75% Non Condensing

品牌： 廣州沃佳 型號： VG-724 產地：廣州 供應商：廣州市沃佳軟件技術有限公司

自主研發、生產、銷售機器視覺檢測系統，算法功能強大，適合各種檢測場景應用，取代人工，支持功能定制。

品牌： 廣州沃佳 型號： VG-725 產地：廣州 供應商：廣州市沃佳軟件技術有限公司

自主研發、生產、銷售機器視覺檢測系統，算法功能強大，適合各種檢測場景應用，取代人工，支持功能定制。

品牌： 廣州沃佳 型號： VG-726 產地：廣州 供應商：廣州市沃佳軟件技術有限公司

自主研發、生產、銷售機器視覺檢測系統，算法功能強大，適合各種檢測場景應用，取代人工，支持功能定制。

品牌： 廣州沃佳 型號： VG-728 產地：廣州 供應商：廣州市沃佳軟件技術有限公司

自主研發、生產、銷售機器視覺檢測系統，算法功能強大，適合各種檢測場景應用，取代人工，支持功能定制。

品牌： 深圳旗眾智能 型號： VMC0430 產地：深圳 供應商：深圳市旗眾智能科技有限公司

采用自主研發的全景視覺灌膠控制系統VMC0430，自動快速識別灌膠位置（加工件位置)，準確控制膠量與加工軌跡，無需專用治具定位，可以任意擺放產品，能夠完美實現各種點、線、弧、圓等不規則復雜圖形的灌膠，該系統有著操作簡單、加工速度快、效率高、膠量控制精準等特點。

品牌： 深圳旗眾智能 型號： QZTF 產地：深圳 供應商：深圳市旗眾智能科技有限公司

高速視覺手機輔材貼合系統是旗眾智能針對高速手機輔材貼合設備，結合機器視覺與運動控制技術而專門研發的一套功能齊全、高精度、高加工效率的智能系統?？刂葡到y(tǒng)由視覺系統、運動控制系統和數據庫三部分組成，加入飛拍相機，實現高貼合精度；單機多頭貼裝，對稱的機械結構，極大地提高加工效率。

品牌： 深圳旗眾智能 型號： VMC0420 產地：深圳 供應商：深圳市旗眾智能科技有限公司

目前，桌面點膠機自動化程度不高，人工操作介入高，生產效率低，很難做到點膠 位置的精準，只適宜批量少規格，且治具成本高。旗眾智能針對這種情況，研發出一套 真正適合桌面點膠機的系統—VMC0420高端型桌面視覺點膠機控制系統。該系統操作 簡單，視覺自動識別，支持多種工件隨意擺放，CAD導圖自動生成點膠路徑，能夠大幅 減少桌面點膠機編程時間，有效提升生產效率和質量，讓傳統桌面點膠機變得更智能、 更高端。

品牌： 佛山育能 型號： 機器視覺教學創新實驗臺 產地：佛山 供應商：佛山市順德區育能裝備有限公司

佛山育能機器視覺機器視覺教學創新實驗臺,通過在此平臺進行實驗操作，快速了解圖 像采集設備的選型和應用，準確評估自己的視覺系統，特別適合于大學和研究機構學生和教師開展機器視覺教學和科研、系統開發前 期評估和開發工作，以及工業視覺開發工程師。

品牌： 東莞康耐德 型號： 產品外觀視覺檢測系統 產地：東莞 供應商：東莞康耐得智能控制有限公司

我們的軟件算法豐富高效，開發效率高?！迸c其他系統相比，我們的系統要求配置比較低，支持二次開發不需要代碼就可完成視覺項目，還可以和多種品牌的工業相機對接”。我司已經開發了多款智能檢測系統，如“IC表面缺陷及溢膠檢測視覺系統”，其主要功能為檢測精密IC在組裝過程中存在表面缺陷和溢膠的產品；又如“藥品檢測視覺系統”，它能快速分揀畸形的膠囊；還如“紙幣分揀視覺系統”，其主要功能為準確快速地對三種紙幣（面值1元，5元，10元）進行分揀及統計；還有“SIM卡槽尺寸測量視覺系統”能夠定位卡槽中心，測量卡槽卡位尺寸并判斷是否在設計規格內；此外還有多款智能檢測與視覺系統，不勝枚舉。我司的這些系統主要應用于醫藥行業、五金行業、儀器儀表設備行業、電子行業等。

機器視覺 儀器網機器視覺產品導購專場為您提供機器視覺功能原理、規格型號、性能參數、產品價格、詳細產品圖片以及廠商聯系方式等實用信息，您可以通過設置不同查詢條件，選擇滿足您實際需求的機器視覺產品，同時機器視覺產品導購專場還為您提供精品優選機器視覺產品和機器視覺相關技術資料、解決方案、招標采購等綜合信息。